MagEZ Car Mount Pro | Style Your Car and Ease Your Driving

PITAKA

Hi everyone,

Following the MagEZ Case 2 for iPhone 13 Series, we are having the MagEZ Car Mount Pro joining the MagEZ 2.0 Ecosystem!

Are you fond of the streamlined stlye of the car mount? Is it a good partner for you even on bumpiest road?

Don’t hesitate!
Use your excellent photography skills to help us understand the charm of the newcomer, and let us know if it does a good job with your new iPhone 😄

mike5

I have a question as I am having issues putting the MagEZ Case 2 in my Prius vents. The older version worked great but I am having trouble w/the hook. From the box, my hook only shows 1 ½ holes before the hook and it isn’t long enough to reach in the vent. All the pictures I see show 4-5 holes prior to the hook making the reach longer. I have pulled and pushed on mine, but I can’t get the hook to extend any further. Any help w/what I am doing wrong? Thanks, I would love to display a picture once I get it functional.

PITAKA

mike5
Hi Mike, could you please take a picture of the hook for us? If possible, please take a video on how you install the Mount pro as well. It will be helpful for us to judge the problems.
You also can contact us via support@ipitaka.com, and we will have colleagues follow up specially.

PITAKA

mike5
Here is a video guide for your reference. You can focus on the video from 25s to 35s — rotate the part in the middle, and the hook will stretch out.
Please let me know if it helps. Thanks.

mecoolai

In your packaging there is a soft dark pill-like object. What is that for? Is that to wedge around the back of the vent? If you have instructions and pictures that would be helpful

PITAKA

mecoolai
Hi there, thanks for reaching out. I have updated above video about how to install the MagEZ Car Mount Pro. I hope it is helpful.

mecoolai

Thanks for the video, however there are two rubber shaped soft pills in the box that have 3m tape on one size but looks like its installed vertically. What are those for and how should they be installed? I don’t see anything in the pamphlet that talks about it…

PITAKA

Hi there, those are two clips used to fix the charging cable. Take off the tape and stick it to somewhere you want, then wrap in your Mount Pro’s cable from the cut of the clip to hold the thread in position.
It is up to you whether to use it or not.

vid-20211027-115019-compressed-with-flexclip.mp4

9MB

Torpc

Just got my magez charger for the new iPhone 13 and it goes beautifully with the magez case and wallet!

PITAKA

Torpc
Hi Torpc, thank you for your sharing. The combination looks great!
How do they work? Is your phone held tightly by the mount when you are driving?

olduser

Got my new one today and it charges really slow on my IPhone 13 pro max. It’s not my adaptor since my older version Magez charger still works and charges 2-3 times faster.

PITAKA

Hi there, we are sorry to hear about your problem.
Could you please feedback to our support team with your order information via support@ipitaka.com？We need collect details to find out if it is a quality issue. Thanks.

olduser

I will test it out more today before I contact It does odd things when I first put iPhone on it. Makes a loud click then the charge indicator shows up on screen phone at 90% sat for ½ hour then was only at 92%.
My other would have been almost done charging with same things running. My adaptor is able to charge 20 watts and tested it almost does 20 watts on ipad.

PITAKA

olduser
We look forward to your updates. Please offer us some pictures or videos for reference if you could. It is helpful for us to justify the problems. Thank you.

olduser

well turns out it’s my fault i did not see the little note at bottom only supports 7.5 watts iphone. Though the Iphone 13 pro max supports 20 watts fast charge and does charge at about 20 watts with apple magsafe I have a desk MagSafe and tested and amperas 4 app about 19.85 watts. The older magez tested 9.75 ish this new version is only 7.75 ish. So driving with gps long trips will in fact wear down battery faster and cause long temp damage to battery health. MagSafe running on my older phone battery health is at 98% after 1 year. Other non magsafe wear battery health faster as they take longer to charge and heats up Iphones longer. longer heat build up = bad battery health. Others have tested iPhone 13 and can charge at 27 watts… I will be returning it. look it up and see.

oleg

купил работает прекрасно

MaxFreak

I got the MagEZ Car Mount Pro last week for my iPhone Pro 13. It arrived safely packaged. Getting it out of the package was not so easy, because of under pressure building up while pulling the cover. But overall very well designed package. Installation was a fluke. It was easier than with the last generation model and the grip is much more stable and better adjustable.

The cable has a very good quality and the length fitted ideally. The iPhone has a very strong connection to the mount via magnets. In comparison to the last generation it is automatically positioned into the same position every time it is connected. The magnets are also a lot stronger.

So over all the case and the mount is an excellent combination which I can recommend.

PITAKA

MaxFreak
Hi there, thank you so much for sharing these fantastic photos. Your positive review means so much for our new products. We hope you enjoy our upgraded magnetic system in routine use :)

guppybeast

What size is the ball mount that is used to connect to the different mounting options?

PITAKA

guppybeast
Hi there, the diameter of the ball is 17mm, if it is the information that you want.
May I know which car mount you are using?
I’m not sure if this part is avalible in the market.